Replace Your Old Hangers with New Double Traverse Rods

Even though enhancing their living rooms, individuals typically choose to set up curtain rods that could seamlessly match with the overall decor from the house. These days, you will find different designs of rods available. You can either want to purchase easy Decorative Curtain Rods or traverse curtain rods that come with a pulley system, which tends to make it easy to open and close the drapes by just pulling the wand. A number of the hardware of those rods operates through a side draw whereas other folks make use of center draw.

The layout in the drapes whilst employing these rods will probably be such that an S-shaped pin attaches towards the pleats on your drapes having a Curtain Hook finish that can be observed by way of the tiny hole in the hanger. Because the hangers utilised are created of plastic, they can break or put on out very easily when exposed to sun or with the passage of time. Even so, these hangers will not be very costly and may be very easily bought and installed in just a few minutes time. When they develop of their age, you'll be able to replace them to initiate a suitable functioning of the rods and curtains.

This short article discusses techniques via which you can replace your old, worn-out hangers with new ones.

Whether you are utilizing single or double traverse rods, it really is first essential for you personally to detach the panels on the drapes in the corner on the bracket to expose the traverse rod on the side which has the Curtain Hangers broken. By lifting the hooks, continue to eliminate the drapes in the corner of bracket.

After you happen to be accomplished with their removal, now detach the hooks from the hangers and set the drape in a single side to expose the hardware, rod and ring hangers. To avoid the loss of any pins, which may well be stuck in the seams in the pleats, fold the drapes and maintain them aside. Even so, in the event you think that your curtains require some cleaning, meticulously eliminate the hooks and in the pleats.

The next step would be to unlock the rod, which can be done by pressing down the tab around the pulley positioned on the either side from the rod. This step helps you to easily slide sling hanger off the rod. Now slide the hanger over the housing and by means of the hole provided, lift it out very carefully.

Via the open finish, remove the broken plastic hangers and replace them with new ones. Now match the new hangers via the finish from the rod along with the slot. Just make certain that the hanger faces inside the forward direction.

Once the complete process is over, reattach the drapes or curtains on the traverse rods by inserting the hook finish from the s-shaped pin, which can be observed on the backside in the pleated drapes.

The identical procedure could be followed with extra-long traverse rods. Nonetheless, be cautiously while reattaching the drapes as the s-shaped hooks has a sharp pointed finish, which can get poked on your finger.