Replace Your Old Hangers with New Double Traverse Rods

While enhancing their living rooms, men and women typically favor to set up curtain rods that will seamlessly match with all the overall decor of the home. Presently, you can find various styles of rods accessible. You are able to either want to purchase easy Decorative Curtain Rods or traverse curtain rods that include a pulley system, which makes it easy to open and close the drapes by just pulling the wand. Several of the hardware of those rods operates by way of a side draw whereas other people make use of center draw.

The layout of the drapes although using these rods will be such that an S-shaped pin attaches for the pleats in your drapes using a Curtain Hook end that can be observed through the modest hole inside the hanger. Because the hangers employed are created of plastic, they are able to break or put on out easily when exposed to sun or together with the passage of time. However, these hangers will not be quite pricey and can be simply purchased and installed in just a few minutes time. As soon as they develop of their age, you are able to replace them to initiate a proper functioning of the rods and curtains.

This short article discusses strategies via which it is possible to replace your old, worn-out hangers with new ones.

Regardless of whether you're employing single or double traverse rods, it truly is 1st required for you to detach the panels of the drapes from the corner from the bracket to expose the traverse rod on the side which has the Curtain Hangers broken. By lifting the hooks, continue to take away the drapes in the corner of bracket.

Once you're carried out with their removal, now detach the hooks from the hangers and set the drape in a single side to expose the hardware, rod and ring hangers. To avoid the loss of any pins, which may be stuck within the seams on the pleats, fold the drapes and keep them aside. Even so, in the event you believe that your curtains need to have some cleaning, carefully get rid of the hooks and from the pleats.

The subsequent step is always to unlock the rod, which can be done by pressing down the tab around the pulley positioned on the either side from the rod. This step aids you to effortlessly slide sling hanger off the rod. Now slide the hanger over the housing and by means of the hole provided, lift it out very carefully.

Via the open finish, remove the broken plastic hangers and replace them with new ones. Now fit the new hangers by way of the end of the rod and the slot. Just ensure that the hanger faces in the forward path.

When the entire procedure is more than, reattach the drapes or curtains around the traverse rods by inserting the hook finish from the s-shaped pin, which may be observed around the backside on the pleated drapes.

The same method can be followed with extra-long traverse rods. However, be cautiously although reattaching the drapes as the s-shaped hooks features a sharp pointed finish, which can get poked in your finger.