Replace Your Old Hangers with New Double Traverse Rods

Whilst enhancing their living rooms, people generally prefer to install curtain rods that will seamlessly match together with the general decor from the property. Nowadays, there are various styles of rods accessible. You are able to either wish to purchase easy Decorative Curtain Rods or traverse curtain rods that include a pulley method, which tends to make it simple to open and close the drapes by just pulling the wand. A number of the hardware of these rods operates by way of a side draw whereas other people make use of center draw.

The layout of the drapes whilst making use of these rods is going to be such that an S-shaped pin attaches to the pleats on your drapes having a Curtain Hook finish that can be observed via the little hole inside the hanger. Considering that the hangers used are made of plastic, they're able to break or put on out effortlessly when exposed to sun or with all the passage of time. Even so, these hangers usually are not extremely costly and may be effortlessly bought and installed in just a number of minutes time. After they grow of their age, you can replace them to initiate a suitable functioning of your rods and curtains.

This short article discusses methods by way of which you'll be able to replace your old, worn-out hangers with new ones.

Regardless of whether you are employing single or double traverse rods, it truly is initial required for you personally to detach the panels from the drapes in the corner on the bracket to expose the traverse rod on the side which has the Curtain Hangers broken. By lifting the hooks, continue to get rid of the drapes from the corner of bracket.

When you happen to be accomplished with their removal, now detach the hooks from the hangers and set the drape in one particular side to expose the hardware, rod and ring hangers. To avoid the loss of any pins, which may possibly be stuck inside the seams of the pleats, fold the drapes and maintain them aside. Nonetheless, should you believe that your curtains need to have some cleaning, cautiously eliminate the hooks and from the pleats.

The next step is to unlock the rod, which could be done by pressing down the tab on the pulley located around the either side on the rod. This step assists you to effortlessly slide sling hanger off the rod. Now slide the hanger over the housing and by means of the hole provided, lift it out meticulously.

By means of the open finish, remove the broken plastic hangers and replace them with new ones. Now fit the new hangers by way of the finish of the rod and the slot. Just make certain that the hanger faces inside the forward direction.

Once the entire process is over, reattach the drapes or curtains on the traverse rods by inserting the hook finish in the s-shaped pin, which could be noticed around the backside on the pleated drapes.

The same method could be followed with extra-long traverse rods. Nevertheless, be meticulously even though reattaching the drapes as the s-shaped hooks features a sharp pointed finish, which can get poked on your finger.