Replace Your Old Hangers with New Double Traverse Rods

Even though enhancing their living rooms, individuals generally choose to set up curtain rods that could seamlessly match together with the overall decor of the property. Presently, you will find diverse designs of rods obtainable. You are able to either wish to buy basic Decorative Curtain Rods or traverse curtain rods that come with a pulley system, which makes it simple to open and close the drapes by just pulling the wand. Several of the hardware of those rods operates by way of a side draw whereas others make use of center draw.

The layout in the drapes even though utilizing these rods will be such that an S-shaped pin attaches to the pleats in your drapes with a Curtain Hook finish that can be noticed by way of the small hole inside the hanger. Given that the hangers utilized are made of plastic, they are able to break or wear out effortlessly when exposed to sun or using the passage of time. Nonetheless, these hangers aren't very expensive and can be easily purchased and installed in just several minutes time. After they grow of their age, it is possible to replace them to initiate a correct functioning of one's rods and curtains.

This article discusses techniques by way of which it is possible to replace your old, worn-out hangers with new ones.

Regardless of whether you happen to be employing single or double traverse rods, it's very first necessary for you to detach the panels from the drapes in the corner on the bracket to expose the traverse rod around the side which has the Curtain Hangers broken. By lifting the hooks, continue to remove the drapes in the corner of bracket.

After you're done with their removal, now detach the hooks from the hangers and set the drape in 1 side to expose the hardware, rod and ring hangers. To avoid the loss of any pins, which may possibly be stuck within the seams of the pleats, fold the drapes and keep them aside. However, should you believe that your curtains require some cleaning, carefully remove the hooks and from the pleats.

The following step would be to unlock the rod, which may be accomplished by pressing down the tab around the pulley positioned on the either side on the rod. This step helps you to simply slide sling hanger off the rod. Now slide the hanger over the housing and by means of the hole supplied, lift it out cautiously.

By means of the open end, get rid of the broken plastic hangers and replace them with new ones. Now match the new hangers via the end of the rod and also the slot. Just guarantee that the hanger faces within the forward path.

As soon as the complete process is over, reattach the drapes or curtains on the traverse rods by inserting the hook finish from the s-shaped pin, which could be observed on the backside in the pleated drapes.

Exactly the same process might be followed with extra-long traverse rods. Even so, be carefully even though reattaching the drapes because the s-shaped hooks has a sharp pointed end, which can get poked on your finger.