The way to Place Up Curtain Bracket

Window curtains add a new viewpoint to a area by dressing up a window with added color and light handle. Curtain Bracket have turn out to be the newest in fashion, adding flair to an otherwise utilitarian accessory together with the numerous poles and finials of wood and metal. Whatever kind of pole or curtain selected, a number of guidelines ought to be observed to ensure a job nicely accomplished.

Measure the window to become decorated and obtain Decorative Curtain Rods and pole accordingly. Curtain Bracket differ in size so be sure to buy a pole at least five inches longer than the width from the window. By way of example, a 30 inch window demands a 35 inch pole. Some Curtain Bracket consist of Curtain Hangers, some usually do not. Make sure you've the correct hanging hardware for the curtain pole chosen, such as screws.

Basic tools required to achieve putting up a curtain pole: - Curtain pole - Brackets - Screws - Level - Tape measure or 12 inch ruler - Pencil - Drill - Screwdriver This would be the right job to use a cordless drill with a screwdriver bit.

Double Curtain Rod Brackets ought to be mounted equidistance in the window edges, about 3 to 5 inches in the edge of the window. The curtain pole is longer than the window width and should have the very same amount extending either side on the window edge. Wider windows might require a third bracket centered to maintain the pole from bending in the weight in the curtains.

Leveling the curtain pole is as important as producing confident the pole and curtains would be the right size for the window. Length in the curtains need to either be longer than the window or almost reach the floor. Use the curtain pole to verify level by suspending the pole above the window edge and mark using a pencil level for every end.

Some Curtain Bracket are as well extended for the project at hand. Use a miter box and pull saw to get a wood pole. Rods of smaller sizes may be cut using a pipe cutter or metal hacksaw with 28 teeth per inch. In the event the curtain pole consists of two pieces, shorten both components by equal amounts so the joint remains centered.

Use a pencil and mark where to spot the brackets by marking the screw holes of the bracket on the wall. Verify with level and verify distance from window edge prior to drilling holes. Make adjustments if essential, and then drill starter holes with drill.

Line up the holes of each and every bracket more than the starter holes and insert screws having a screwdriver. A cordless drill using a screwdriver bit makes this job much easier.

Mount the curtain pole more than brackets. Inspect for loose screws or fittings. Make corrections is required, then hang curtains.